Why does my 8-Channel pipette pick up tips so forcefully?
If you’re using an 8-Channel pipette, you might see it pick up tips with seemingly excessive force. That force is necessary for reliable tip pickup and seal. Read More
If you’re using an 8-Channel pipette, you might see it pick up tips with seemingly excessive force. That force is necessary for reliable tip pickup and seal. Read More
This article lists the ranges of flow rates for GEN2 pipettes used on the OT-2. Read More
8-Channel GEN2 pipettes on the OT-2 allow you to utilize any number of channels ranging from one to eight during liquid handling steps for transfers and other actions. Read More
This article explains how to adjust the Z-stage carriage of the OT-2 to correct pipette misalignment. Read More
OT-2 robots that were manufactured before 2019-09-05 need a hardware adjustment before you can attach GEN2 pipettes to them. Read More
This article provides information on performance verification of Opentrons GEN2 pipettes used on the OT-2. Read More
This article provides a brief overview of the functionality of GEN2 pipettes used on the OT-2. Read More
You may notice mechanical noises from the robot that could be louder than what you’re accustomed to while using a P300 8-Channel GEN2, but these noises are likely within the normal range of operation. Read More
If you use an OT-2R with the incorrect bottom pipette attachment screw for a P300 8-Channel GEN2, you might experience problems with the pipette not ejecting or dropping tips. Read More
The pipette mounts on the OT-2R feature a new mechanism to more easily level multi-channel pipettes. Read More