Opentrons logo
Cancel

Knowledge Hub

Support Articles

Protocol Timer – duration estimator

The Protocol Timer allows you to estimate how long protocols should take before running them. It is compatible with both…

Support Articles

Power consumption of the OT-2 and hardware modules

The following are rough estimates of how much power the OT-2 and…

Support Articles

OT-2 motor specifications

This article contains diagrams and basic information about motor specifications for the OT-2 robot and GEN2 pipettes.

Support Articles

OT-2 glossary

This article serves as a visual guide to the various parts of your OT-2 robot and pipettes.

Support Articles

Manually adding a robot’s IP address

This article should be used as a resource if automatic discovery of the robot is not a viable option per…

Support Articles

Is the robot capable of loading plates into an imaging system?

While this is currently not an available feature of Opentrons robots, our software is open source and allows for custom…

Support Articles

Introduction to Opentrons GitHub

This article serves as an overview of the various Opentrons repositories on GitHub, the platform that hosts all of our…

Support Articles

Integrating the OT-2 with other lab equipment

This article outlines different ways to integrate the OT-2 with other lab equipment, each varying in complexity and capability.

Support Articles

How to play sounds out of the OT-2

This article provides instructions on how to play sounds through the OT-2’s built-in speaker using the Python API.

Support Articles

How to apply Labware Offset values in Juypter Notebook and opentrons_execute

To upload Labware Offset data via Jupyter Notebook or the command line interface with opentrons_execute in software versions 6.3 and…

Showing 449 resources